Product Code
|
UTM-8010
|
Servo Controlled Wide Test Space
Electromechanical Universal Test Machine,
50 kN, 220-240V, 50-60Hz, 1 ph.
|
Standards
EN 10545-4, 1015-12, 13748-1, 13748-2, 491, 538, 1170-4, 1170-5, 12372 12808-3, 13494,1542, 1346, 1348, 12004, 1607, 1015-11, EN ISO 15630-2, 6892-1 7500-1
UTM-8010, 50 kN capacity Servo Controlled Wide Test Space Electromechanical Universal Testing Machine is fully automatic and multi purpose versatile machine which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories.
The Machine is equipped with a servo motor and BC 100 TFT Graphics DataAcquisition and Control Unit. Flexural , breaking, bending, tensile, compression strenght, tensile adhesion and tensile bond strength, CBR, Marshall, tensile and weld shear force tests can be perform under load or displacement control by using suitable accessories up to the machine capacity on wide rande of materials, such as ceramic and terrazo tiles, naturel stone, adhesives for tiles, grouts for tiles clay and concrete roofing tiles, glass-fibre reinforced precast concrete products, thermal insulating products, plastering mortars, products for the protection and repair of concrete structure, soil and bituminous mixtures and welded fabric steel for the reinforcement of concrete.
The Testing Machine consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be adjusted to set the vertical test space for different tests.
User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single re-circulating ball screw, powered by an servomotor. Advanced closed loop control system assures accurate load or displacement pace rate on sample.
The load is measured by a load cell that located on upper crosshead and displacement is measured by displacement transducer fitted to the lower crosshead. The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.
Suitable accessories and different capacity loadcells should be ordered separately acc.to the test performed.
UTM-8010 supplied with 50 kN Capacity Load Cells
Data Acquisition & PC Software
Digital display graphics data acquisition and control system are designed to control the machine and process the data from displacement transducer and Load cell, installed on the frame. It has graphical TFT display of 800x480 pixel and show both load and displacement. The digital unit sends all these information to PC and accepts commands of Start, Stop, and Test Speed etc.
Manual zeroing of all engineering values exist prior to the beginning of test. Materials testing software is available for Utest UTM series universal testing systems. Test software provides fully customized parameter definition, automatic test control, data collection, results analysis and reporting. Advanced templates for testing to the standards a wide variety of materials and applications help ensure quick test execution. Various engineering calculations are performed automatically by the test software. Test results stored in computer for your future retrieve or re-analysis and reporting. Data Exchange between other Windows based applications such as Excel format.
Tests with UTM-8010
Electromechanical Universal Testing Machines are suitable for difference tests on various materials as;
- Modulus of rupture and Breaking strength test for ceramic tiles
- Flextural strength tests of terrazo tiles, naturel stone, clay and concrete roofing tiles
- Bending strength test of glass-fibre reinforced precast concrete products, tensile strength tests of thermal insulating products
- Compressive/ Flexture strength of rendering and plastering mortars, grouts for tiles
- Tensile bond/ adhesion tests of cementitious adhesives for tiles, injection products rendering and plastering mortars, products for the protection and repair of concrete by pull-off
- Uniaxial, triaxial and CBR tests of soil
- Marshall stability test and Indirect tensile test of bituminous mixtures
|
Frame Features
|
|
Max. Load
|
50 kN
|
|
Machine Class
|
Class 1 starting from1% of the capacity
|
|
Max. Vertical Test Space
(without accessories)
(Lower crosshead at middle stroke.
|
Min. 200mm / Max. 400 mm
(without accessories)
|
|
Distance Between Columns
|
850 mm
|
|
Stroke
|
100 mm
|
|
Test Speed Range
|
0,001-50 mm/min.
|
|
Load Rate
|
0,001-2 kN/s
(Depend on specimen stiffness)
|
|
Electrical Requirement
|
220-240V, 50-60Hz, 1 phase.
|
|
Weight Approx.
|
310 kg
|
|
MATERIALS
|
TESTS / METHODS
|
STANDARD
|
ACCESSORIES
|
|
Welded Fabric for
Reinforcement of
Concrete
|
Tensile and
Weld Shear
Force Tests
|
EN ISO 15630-2
EN ISO 6892-1
|
UTM-8060 Tensile Grip complete with grips for round specimens from 2 to 10 mm dia., and flats 0 to 8 mm thick.,
UTGM-0015 Load Cell 10 kN Capacity
UTM-8055 Holder for Weld Shear Force Tests for welded wire
|
|
Ceramic Tiles
|
Flexure,
Bending and Breaking
Tests
|
EN 10545-4
|
UTM-8012 Flexural Testing Assembly,
for UTM-8010 And UTM-8020.
Consist of two upper rollers and two lower rollers 820 mm length and 20 mm dia.
|
|
Clay Products
|
EN 538
|
|
Concrete and
Natuıral Stone
Products
|
EN 13748-1
EN 13748-2
EN 491
|
|
EN 12390-5 (*)
ASTM C78(*),
C293(*)
AASHTO T97(*)
BS 1881:118(*)
|
UTC-5501 Flexural Testing Assembly for Concrete Beams
|
|
EN 12372
EN 1339(*)
EN 1341(*)
EN 1343(*)
|
UTC-5504 Flexural Testing Assembly with 610 mm length and 38 mm dia.
|
|
EN 1170-4
EN 1170-5
|
UTM-8095 Flexure Apparatus for EN 1170
|
|
Mortar For
Masonry and
Grouts for Tiles
|
EN 196-1
ASTM C348
EN 12808-3
EN 1015-11
|
UTCM-0121/E Compression Jig Assembly EN, to test portions of 40x40x160 mm mortar prism. (*)
UTCM-0121/A Compression Jig Assembly ASTM, to test 50 mm (2") mortar cubes. (*)
UTCM-0120/E Flexure Jig Assembly EN, to test 40x40x160 mm mortar prisms, distance between lower bearers is 100 mm
UTCM-0120/A Flexure Jig Assembly ASTM, to test 40x40x160 mm mortar prisms, distance between
lower bearers is 119 mm
|
|
Adhesives for
Tiles, Mortar for
Masonry and
Products for
The Protection
and Repair Of
Concrete
Structures
|
Tensile Adhesion/Bond Strength
|
EN 1346
EN 1348
EN 12004
EN 1015-12
EN 1542
|
UTM-8070 Pull-Headed Plate Set for
EN 1348 and EN 12004
UTM-8080 Pull-Headed Plate Set for
EN 1015-12 and EN 1542
UTM-8082 Frusto-Conical Shaped Rings.
EN 1015-12, stainless steel, Ø50mm
UTM-8064 Holders for Concrete Base Plate and Specimen EN 1348, 1015-12, 1542 (**)
UTM-8074 Holders for Concrete Base Plate and Specimen EN 1348, 1015-12. (**)
UTM-8084 Holders for Concrete Base Plate and Specimen EN 1542 (**)
UTGM-0010 Load Cell 5 kN Capacity
UTGM-0015 Load Cell 10 kN Capacity
|
|
Thermal Insulating
Products
|
Tensile
Adhesion / Bond
Strength
|
EN 13494
EN 1607
|
UTM-8121 Tensile-Headed Solid Plate Set, 50x50x5 mm
UTM-8122 Tensile-Headed Solid Plate Set, 100x100x5 mm
UTM-8123 Tensile-Headed Solid Plate Set, 150x150x5 mm
UTM-8124 Tensile-Headed Solid Plate Set, 200x200x5 mm
UTM-8125 Tensile-Headed Solid Plate Set, 300x300x5 mm
|
|
SOIL
|
CBR Under
Displacement
Control
|
EN 13286-47
ASTM D1883
AASTHO T193
|
UTM-0110 CBR Penetration piston, used to perform
CBR tests.
|
|
Quick Triaxial Tests
|
BS 1377-8
ASTM D2850
ASSHTO- T245
|
See the table bottom of the page
|
|
BITUMINOUS
MIXTURES
|
Marshal Test Under
Displacement
Control
|
EN 12697-34
ASTM D1559
|
UTAS-0057 Breaking Head Stability Mould, cast iron, for 4" (101,6 mm) Marshall Samples
UTAS-0058 Breaking Head Stability Mould, cast
iron, for 6" (152,4 mm) Marshall Samples
|
|
Indirect Tensile
Splitting Tests
|
EN12697-23
AASHTO T283
|
UTAS-0063 Tensile Splitting Device for
Compacted Bituminous samples 100 mm (4") dia.
|
(*) Up to the machine capacity
(**) Supplied complete with the connectiion appratus fit with the ordered machine.
|
Typical configuration of system for different tests (UU-CU-CD)
|
|
Product Code
|
Description
|
UU
|
UU-CU-CD
|
|
UTM-0108
|
Multiplex Universal Electromechanic Test Machine*
|
1
|
1
|
|
UTGM-0010
|
Load Cell 5 k N
|
1
|
1
|
|
UTS-0400
UTS-0401
|
Triaxial Cell**
|
1
|
1
|
|
UTS-0405
|
Block with One Connection Line for Triaxial Test Cells,
|
1
|
-
|
|
UTS-0406
|
Block with 3 Connection Lines for Traxial Test Cells
|
-
|
1
|
|
UTGM-0110
|
Pressure Transducer
|
1
|
3
|
|
UTS-0408
|
Oil and Water Constant Pressure System
|
1
|
2
|
|
UTS-0415
|
Automatic Volume Change Unit
|
-
|
1
|
|
UTG-0320
|
Static Unilogger4 Channels
|
-
|
1
|
|
UTS-0416
|
Software to Perform UU Triaxial Tests
|
1
|
1
|
|
UTS-0417
|
Software to Perform CU-CD Triaxial Tests
|
-
|
1
|
|
UTS-1330 and
UTGP-1140
|
De-Airing Water Tank, 7 L. and Hose
|
1
|
1
|
*Supplied complete with UTGM-0025 50 kN Load Cell, UTGM-0062 25 mm Linear Potentiometric Transducer and UTC-4930 BC 100 Data Acquisition and Control Unit.
**Choose the suitable cell for the specimen size (UTS-0400: 38-50 mm dia. samples / UTS-0401: 70-100 mm dia. samples). For cell accessories, sample prepatarion accessories and Optional apparatus for de-airing water please see Triaxial Test Systems.
