Product Code
|
UTB-0120
|
Semi-Automatic Digital Bitumen Penetrometer
|
|
UTB-0122
|
Sample Cup, Ø 55x35 mm,
stainless steel
|
|
UTB-0123
|
Sample Cup, Ø 70x45 mm,
stainless steel
|
|
UTB-0124
|
Penetration Needle, 2,5 g
|
|
UTB-0125
|
Transfer Dish for UTB-0120, UTB-0126 and UTB-0130
|
|
Models for 220-240V 50-60 Hz, 1 ph.
|
UTB-0120
|
|
Models for 110-120V 60 Hz, 1 ph.
|
UTB-0120-N
|
Standards
EN 1426; ASTM D5; AASHTO T49
The UTB-0120 Semi-Automatic Digital Bitumen Penetrometer is used to determine the penetration of bituminous samples under constant load, time and temperature. The Penetrometer consists of a frame with a levelling screws and screw gear assembly with handwheel for vertical adjustment, a digital penetration measurement gauge with 0.01 mm resolution/readibility, a digital timer, a magnifying lens and a low voltage illuminator mounted on flexible arms.
Penetration time 0-99 sec can be set up by user with the digital timer The timer will allow the needle to free fall into the sample for the engaged time interval and then lock the needle from advancing while providing a direct reading of the test results.
A thermometer (IP38, ASTM 17C or 63C) required for the test should be ordered separately.
The Semi-Automatic Digital Penetrometer is supplied complete with;
- Penetration Needle, 2,5g, 1 pieces
- Needle holder
- Weights of 50g and 100 g
- Transfer Dish
- Sample Cup Ø 55x35 mm, 3 pieces, stainless steel
|
Dimensions
|
200x300x500 mm
|
|
Weight (approx.)
|
16 kg
|
