Product Code
|
UTC-4609EG
|
600 kN EN 772-1 and General Purpose Compression Testing Frame for Masonary Units/ Blocks, Cylinders and Cubes
|
|
UTC-4709EG
|
1100 kN EN 772-1 and General Purpose Compression Testing Frame for Masonary Units/ Blocks, Cylinders And Cubes
|
|
UTC-4682
|
Pedestal for 2000kN and 3000 kN Compression Testing Frames with Welded Walls
|
UTC-4609EG and UTC-4609EG compression testing frames for masonary units/ blocks, cylinders and cubes consist of a loading cylinder assembly, lower and upper (spherically-seated) loading platens.
The compression testing frames provides the stability needed for accurate and repeatable test results over the years of operation.
Any hydraulic power pack with control and read out unit and a pressure transducer for measuring the loads, can be positioned on the right hand side of the load frame for easier accessibility, increased productivity and for safer operations.
All frames have a single acting up stroking ram and also have front and rear protective doors and limit swich for piston stroke for safety. The diameter of the pistons are designed to work with their load capacities. There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder.
The lower loading platens are provided with lines for centering specimens
UTC-4682 Pedestal that are made of steel to facilitate the user’s placement of specimens in the frames for compression test should be ordered separately.
See the below table for supplied items with the frames.
|
GENERAL PURPOSE AND EN 772-1 COMPRESSION TESTING FRAMES
FOR CUBES, CYLİNDERS AND BLOCKS /MASONARY UNIT
|
|
Models
|
UTC-4609EG
|
UTC-4709EG
|
|
Product Photo
|
|
|
|
Capacity
|
600 kN
|
1100 kN
|
|
Frame Type
|
Welded Steel
|
Welded Steel
|
|
Lower Bearing Block, Dimensions (D)
|
310x510x50 mm
|
310x510x50 mm
|
|
Upper Bearing Block, (With Spherically Seating Assembly ) Dimensions (C)
|
310x510x50 mm
|
310x510x50 mm
|
|
Surface Hardness of Bearing Blocks
|
55 HRC
|
55 HRC
|
|
Flatness Tolerance
|
0,05 mm
|
0,05 mm
|
|
Piston Diameter
|
230 mm
|
230 mm
|
|
Piston Stroke
|
50 mm
|
50 mm
|
|
Maximum Vertical Clearance
Between Bearing Blocks (E)
|
330 mm
|
330 mm
|
|
Horizontal Clearance (B)
|
320 mm
|
320 mm
|
|
Specimens Sizes (**)
|
up to 300x500mm masonary units/blocks
|
|
up to Ø160x320 mm cylinders
|
|
200 mm cubes
|
|
Dimensions (wxlxh) (Axd*xF)
|
380x550x750 mm
|
380x550x750 mm
|
|
Weight
|
690 kg
|
690 kg
|
|
Pedestal (Optional)
|
UTC-4680
|
UTC-4680
|
|
(d*) depth
(**) Limited by capacity of the frame
The frames supplied complete with;
• 100 mm, 50 mm, 30 mm height x Ø165 mm distance pieces
• Lifting Device for Lower Loading Platen (UTC-4629)
• Removable transparent front and rear safety doors
|
