Product Code
|
UTC-5729
|
2000 kN EN 12390-4 and EN 772-1 Compression Testing Frames with Welded Walls for Cubes, Cylinders and Masonary Units
|
|
UTC-5739
|
3000 kN EN 12390-4 and EN 772-1 Compression Testing Frames with Welded Walls for Cubes, Cylinders and Masonary Units
|
|
UTC-4682
|
Pedestal for 2000 kN and 3000 kN Compression Testing Frames with Welded Walls
|
Standards
EN 12390-4, EN 12390-3, EN 772-1
UTC-5729 and UTC-5739 compression testing frames with rigid welded steel walls for masonary unıts, cubes and cylınders consist of a loading cylinder assembly, lower and upper (spherically-seated) loading platens. acc. to EN standards.
The frames are tested and certified for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4 by Utest.
EN compression testing frames provides the stability needed for accurate and repeatable test results over the years of operation.
The frames are supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4.
Any hydraulic power pack with control and read out unit and a pressure transducer for measuring the loads, can be positioned on the right hand side of the load frame for easier accessibility, increased productivity and for safer operations.
All frames have a single acting up stroking ram and also have front and rear protective doors and limit swich for piston stroke for safety. The diameter of the pistona are designed to work with the load capacity. There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder.
The lower loading platens are provided with concentric centering lines and fixture for centering specimens
UTC-4682 Pedestal that is made of steel to facilitate the user’s placement of specimens in the frames for compression test should be ordered separately.
See the below table for supplied items with the frames.
|
EN 12390-4 and EN 772-1 COMPRESSION TESTING FRAMES
WITH WELDED WALLS FOR CONCTERE CUBES AND CYLINDERS AND MASONARY UNITS
|
|
Models
|
UTC-5729
|
UTC-5739
|
|
Product Photo
|
|
|
|
Capacity
|
2000 kN
|
3000 kN
|
|
Frame Type
|
Welded Steel
|
Welded Steel
|
|
Lower Bearing Block, Dimensions (D)
|
310x510x50 mm
|
310x510x50 mm
|
|
Upper Bearing Block, (With Spherically Seating Assembly ) Dimensions (C)
|
310x510x50 mm
|
310x510x50 mm
|
|
Surface Hardness of Bearing Blocks
|
55 HRC
|
55 HRC
|
|
Flatness Tolerance
|
0,03 mm
|
0,03 mm
|
|
Piston Diameter
|
250 mm
|
300 mm
|
|
Piston Stroke
|
50 mm
|
50 mm
|
|
Maximum Vertical Clearance
Between Bearing Blocks (E)
|
350 mm
|
350 mm
|
|
Horizontal Clearance (B)
|
360 mm
|
415 mm
|
|
Sizes of Specimens For Cylinders (up to)
|
Ø160x320 mm
|
Ø160x320 mm
|
|
Sizes of Specimens For Cubes (up to)
|
300 mm (**)
|
300 mm (**)
|
|
Sizes of Specimens For Masonary Units (up to)
|
300x500 mm (**)
|
300x500 mm (**)
|
|
Dimensions (wxlxh) (Axd*xF)
|
450x550x1145 mm
|
505x550x1205 mm
|
|
Weight
|
880 kg
|
1120 kg
|
|
Pedestal (Optional)
|
UTC-4682
|
UTC-4682
|
|
(d*) depth
(**) Limited by capacity of the frame
The machines for masonary units, cubes and cylindrs are supplied complete with;
• 100 mm, 50 mm, 30 mm height x Ø205 mm distance pieces.
• Fixture for Centering Specimens, compatible with 310x510x50 mm lower loading platen for 100 mm and 150 mm cubes, Ø100 mm and Ø150 mm cylinders.
• Lifting Device for Lower Loading Platen (UTC-4629)
• Removable transparent front and rear safety doors
Appropriate Distance piece/s for the cylinder and cube specimens with the height of lower than 150 mm should be ordered separately.
|
