Product Code
|
UTC-6729
|
2000 kN EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units
|
|
UTC-6739
|
3000 kN EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units
|
|
UTC-6749
|
4000 kN EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units
|
|
UTC-6759
|
5000 kN EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units
|
|
UTC-4684
|
Pedestal for 2000 kN and 3000 kN Four Column Compression Testing Frames
|
|
UTC-4686
|
Pedestal for 4000 kN and 5000 kN Four Column Compression Testing Frames
|
Standards
EN 12390-4, EN 12390-3, EN 772-1
UTC-6729, UTC-6739, UTC-6749 and UTC-6759 compression testing frames with four column for masonary units, cubes and cylinders consist of a loading cylinder assembly, lower and upper (spherically-seated) loading platens. acc. to EN standards.
EN four column compression testing frames provides the stability needed for accurate and repeatable test results over the years of operation.
The frames are supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4.
Any hydraulic power pack with control and read out unit and a pressure transducer for measuring the loads, can be positioned on the right hand side of the load frame for easier accessibility, increased productivity and for safer operations.
All frames have a single acting up stroking ram and also have front and rear protective doors and limit swich for piston stroke for safety. The diameter of the pistons are designed to work with their load capacities. There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder.The lower loading platens are provided with centering lines and fixture for centering specimens
UTC-4684 and UT-4686 Pedestals that are made of steel to facilitate the user’s placement of specimens in the frames for compression test should be ordered separately.
See the below table for supplied items with the frames.
|
EN 12390-4 and EN 772-1 COMPRESSION TESTING FRAMES WITH FOUR COLUMN
FOR CONCTERE CUBES AND CYLINDERS AND MASONARY UNITS
|
|
Models
|
UTC-6729
|
UTC-6739
|
UTC-6749
|
UTC-6759
|
|
Product Photo
|
|
|
|
|
|
Capacity
|
2000 kN
|
3000 kN
|
4000 kN
|
5000 kN
|
|
Frame Type
|
Four Column
|
Four Column
|
Four Column
|
Four Column
|
|
Lower Platens Dimensions (D)
|
310x510x50 mm
|
310x510x50 mm
|
310x510x50 mm
|
310x510x50 mm
|
|
Upper Platens With Ball Seating Assembly Dimensions (C)
|
310x510x50 mm
|
310x510x50 mm
|
310x510x50 mm
|
310x510x50 mm
|
|
Surface Hardness of Loading Platens
|
≥ 55 HRC
|
≥ 55 HRC
|
≥ 55 HRC
|
≥ 55 HRC
|
|
Flatness Tolerance
|
0,03 mm
|
0,03 mm
|
0,03 mm
|
0,03 mm
|
|
Piston Diameter
|
250 mm
|
310 mm
|
360 mm
|
400 mm
|
|
Piston Stroke
|
50 mm
|
50 mm
|
100 mm
|
100 mm
|
|
Maximum Vertical Clearance Between Platens (E)
|
350 mm
|
350 mm
|
520 mm
|
520 mm
|
|
Horizontal CLearence (B)
|
348/168 mm
|
348/168 mm
|
426/309 mm
|
515 mm
|
|
Sizes of Specimens For Cylinders (up to)
|
Ø150x300 mm
|
Ø150x300 mm
|
Ø150x300 mm
|
Ø150x300 mm
|
|
Sizes of Specimens For Cubes (up to)
|
300 mm (**)
|
300 mm (**)
|
300 mm (**)
|
300 mm (**)
|
|
Sizes of Specimens For Masonary Units (up to)
|
300x500 mm (**)
|
300x500 mm (**)
|
300x500 mm (**)
|
300x500 mm (**)
|
|
Dimensions (wxlxh) (Axd*xG)
|
590x560x1100 mm
|
680x690x1150 mm
|
772x825x1540 mm
|
865x640x1555mm
|
|
Weight
|
1040 kg
|
1540 kg
|
2555 kg
|
3260 kg
|
|
Pedestal (Optional)
|
UTC-4684
|
UTC-4684
|
UTC-4686
|
UTC-4686
|
|
(d*) depth
(**) Limited by capacity of the frame
The frames for masonary units,cubes and cylindrs are supplied complete with;
• 100 mm, 50 mm, 30 mm height x Ø205 mm distance pieces (two pcs. each for UTC-6749 and UTC-6759)
• UTC-4626E - Fixture for centering specimens, compatible with 310x510x50 mm lower loading platen, for 100 mm and 150mm cubes and Ø100 mm and Ø150 mm cylinders (for UTC-6729 and UTC-6739)
• UTC-4627E - Fixture for centering specimens, compatible with 310x510x50 mm lower loading platen, for 150mm and 250mm cubes, Ø150mm and Ø250mm cylinders for UTC-6749 and UTC-6759
• Lifting Device for Lower Loading Platen (UTC-4629)
• Removable transparent front and rear safety doors
Appropriate distance piece/s for the cylinder and cube specimens with the height of lower than 150 mm should be ordered separately for UTC-6729.FPR and UTC-6739.FPR
|
