Product Code
|
UTC-1040
|
Automatic Grinding Machine
|
|
UTC-1042
|
Grinding Wheel UTC-1035 and UTC-1040
|
|
UTC-1043
|
Cradle for Ø:38-100 mm Cylindrical Specimens
|
|
UTC-1044
|
Water Restraint Panel Set
|
|
UTC-1048
|
Water Restraint Panel for Ø160mm Cylinder Specimen
|
|
UTC-1049
|
Water Restraint Panel for 150mm Cube Specimens
|
|
Models for 220-240V 50-60 Hz, 1ph.
|
UTC-1040
|
|
Models for 110-120V 60 Hz, 1ph.
|
UTC-1040-N
|
Standards
EN 12390-1, 12390-3, 12504-1; ASTM C 31, C39, C42, C192, C617
The UTC-1040 Automatic Grinding Machine provides fast grinding of cylinder specimen ends to obtain plane and parallel surfaces according to EN and ASTM standards.
Three units of Ø38 to 100 mm or two units of Ø150-160 mm concrete cylinders ends can be ground simultaneously with the suitable cradle and water restraint panel. The lenght of the any specimen must be longer than 70 mm.
According to ASTM and EN standards, the planeness accuracy of grinded surface is 0.05 mm. and the deviation of perpendicularity of the side with reference to the end faces is 0,5O.
The equipment has selectable advance grinding time functionality by user from 50 to 400 seconds. Optimum grinding time per end of all type specimens is 90 to 120 seconds.
The cradle which specimens are fixed on has automatic bidirectional radial displacement ability. The safe and ergonomic design prevents the user to exposure to water and dust and provides easy access to the water inlet and outlet. Specimen cradles and water restraint panels can easily be installed without the need for any assembly.
Mobility of the machine is achieved with the help of the integral wheels, and all components of the system can be safely accessed for easy maintenance.
The frame is manufactured from aluminum to obtain a lighter weight and the stainless steel exterior shell assures resistance to corrosion.
The water restraint panels should be ordered seperately for cubic specimens or different sized cylindrical specimens.
The Automatic Grinding Machine is supplied complete with;
- Grinding Wheel for concrete specimens
- Cradle for Ø:38mm to100 mm cylindrical specimens
- Water restraint panel set (Consist of four panels Ø150, 100, 75 and 50 mm)
|
The Preparation of Concrete
Cylinder Test Specimen for
Compressive Strength Test
|
EN 12390-1, 12390-3
ASTM C31, C39, C192,
C617
|
The maximum tolerance on the flatness of the potential load bearing surfaces
(the ends of compression test specimens)
is 0.002 in. [0.050 mm]
The deviation of perpendicularity of the side,
with reference to the end faces is 0,5O
|
|
The Preparation of Drilled
Concrete Cores Specimen for
Compressive Strength Test
|
EN 12504-1, 12390-1,
12390-3 ASTM C42,
C397
|
|
Dimensions
|
730x1080x1510 mm
|
|
Weigth (approx.)
|
260 kg
|
|
Power
|
1850 W
|
